Related to this, and very much worth the time to watch, is this video on our planet

And while we’re on the topic, you should stop by YouTube and check out these videos that will really put things into perspective.

I’m hearing the groans now, “it’s just documentaries, who wants to watch that crap. . .”, so no, you won’t find action films or anything on there, but otherwise there are some excellent films if you’re in the mood to open your eyes to the rest of the world

Fair use explicitly allows use of copyrighted materials for educational purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Rather than listing exact limits of fair use, copyright law provides four standards for determination of the fair use exemption:

Let me know if this helps you out or if you have an glaring complaints

DOWNLOAD:

Introduction to Arduino Presentation

Presentation and demo (not included) given at the 2009 Enlight student organization kickoff meeting at the University of Wisconsin – Madison

This work is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 United States License.

Ford Taurus Hazy Headlight before Repair

So I got out my drill, cracked open the headlight restoration kit and . . . READ THE DIRECTIONS! The kit basically included 1 arbor to mount whichever pad you were using on it, 2 ~360 grit foam backed sanding discs, and a single foam pad for use with the polishing compound. I of course, having read the directions, figured we were suffering from a severe case of hazing, so I opted for first using plenty of water and the sanding discs to start things off. The second I touched the sanding disc to the headlight I realized my mistake and now deep scratches which would now require extra buffing time.  After about 3 seconds of buffing and continuously moving you can almost immediately see results:

Ford Taurus Headlight after Repair

Recommendations on Repairing your Own Headlights:

• Carefully clean your headlights before beginning, otherwise you’ll grind the dead bugs into your headlights and have more of a mess to repair!
• Use the foam pad and polishing compound liberally, keep moving so you don’t burn (overheat) the headlights in spots
• You don’t need to be running the drill full throttle, it takes very little pressure and very little speed, take it easy
• Finally, have water handy and occasionally rinse the whole light off to observe any progress and remove anything that’s on the surface so you don’t grind it into the headlight

Finally,  if you’re a DIYer, you can likely perform the same repair with toothpaste and a foam pad glued to a drill/dremel/buffer arbor.  Better yet you can likely buy some polycarbonate polish for cheap from a plastics store (industrial) near your home.  ALWAYS make sure you test your solution on a small unimportant corner of the light to see what’s going to happen before going right to the center of your lense cover and potentially hazing a bad spot in the middle, and ultimately what’s $10 to know you’re doing it right?

You can purchase the kit I used from your local Harbor Freight store or click this link and when you’re done review your Harbor Freight purchases here!

Check it out here.

Here’s a nice list of nets:

Wisconsin Nets

Nice list of state used frequencies:
State Radio Frequencies (police, UW, etc)

I’ll keep posting things as I run into them. Anyone else have anything interesting around here?